Misc.

The Edelbrock #36020 Pro-Tuner EFI Pressure Sensors are intended to be used with Edelbrock's Pro-Tuner EFI system, but may be used with other systems using the supplied connector and wiring. They are configurable to most aftermarket ECUs. If you are...

This nitrous solenoid is used on our race nitrous systems such as our 82312. Features a 1/4 NPT Inlet and a 1/8 NPT outlet on the bottom of the solenoid. It also has a .156 orifice. We recommend our 82219 solenoid bracket for this solenoid.

This solenoid is the nitrous solenoid that is included with our kits that feature external solenoids. Has a .110" orifice, a 1/4" NPT inlet and a 1/8" NPT outlet.Installation Instructions

ZEX doesn?t just sell complete nitrous systems; we also sell all of the small partsyou need to keep running. Items such as bottle brackets, gaskets, bags and bottleoutlet fittings are available for individual purchase.

ZEX doesn?t just sell complete nitrous systems; we also sell all of the small partsyou need to keep running. Items such as bottle brackets, gaskets, bags and bottleoutlet fittings are available for individual purchase.

This solenoid bracket is highly recommended for use with our Race Nitrous Solenoid (NS6741).Installation Instructions

Wow, how do I start to tell the world why NX is different and better than any other company? Lets start with the NX philosophy: All components must be of the highest quality, no off shore junk; 99% of NX products are produced and assembled in the USA;...

PISTON ONLY (NITROUS .093 ORIFICE & .125 ORIFICE)

Wow, how do I start to tell the world why NX is different and better than any other company? Lets start with the NX philosophy: All components must be of the highest quality, no off shore junk; 99% of NX products are produced and assembled in the USA;...

NX Lightning Series solenoids feature CNC aluminum bodies topped with Carbon Fiber cans for the ultimate in weight savings. Each solenoid has a purge or bypass port built in, and a bottom exit for flow unmatched by any other solenoid on the market...

NX Lightning Series solenoids feature CNC aluminum bodies topped with Carbon Fiber cans for the ultimate in weight savings. Each solenoid has a purge or bypass port built in, and a bottom exit for flow unmatched by any other solenoid on the market...

The Edelbrock #36018 Throttle Position Sensor can be used on the Competition Throttle Bodies (Universal 4-barrel Throttle Bodies). The Edelbrock #36018 Throttle Position Sensor is a service item to support the Edelbrock line of throttle bodies and EFI...

Idle Motor (IAC) GM Stepper Type 4 Wire.

This Air/Fuel Monitor displays the actual air/fuel mixture in ratios from approximately 12 to 15:1. Use it to guide carburetor adjustment and jetting or to improve ignition spark advance curves. Not for use with leaded fuels or alcohol.

Edelbrock part #36012 Coolant Temp Sensor for E-Street and Pro-Flo 3 & Pro-Flo 4 systems. This Delphi Temperature Sensor designed for measurement of coolant, oil and other automotive fluids. It has 3/8-18 NPT threads with thread sealant pre-applied and...