Carburetors

The Edelbrock Carburetor Spacer #8725 divided design is for use with Dual-Plane design intake manifolds. The Edelbrock #8725 divided spacer is 1/2" thick and made of wood fiber laminate. The superior heat insulating properties of wood fiber laminate are...

Easy to use A/B epoxy is a two part epoxy that is great for cylinder head and intake modifications. Simply mix the two parts, apply and let cure. Once cured, it can be sanded to shape, drilled and tapped. Wash hands well after handling.

The Edelbrock 8032 Throttle Bracket is a universal design for small block Chevys with Vortec or E-Tec cylinder heads.?

Edelbrock #8029 Universal Throttle and Transmission Bracket for LS1 carbureted applications. This kit makes hooking up your throttle a simple task.Installation Instructions

The Edelbrock Square-bore Carb to Spread-bore Manifold Adapter #2696 is designed to allow installation of the Edelbrock Performer Series carburetor on vehicles with the OEM (original equipment) spread-bore intake manifold (typically GM vehicles that were...

The Edelbrock 9906 Remanufactured Performer Series 600 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day...

Jet And Rod Kit #1805 And 1806 AVS Thunder Series Carburetors.

2697; Edelbrock; Edelbrock Carburetor; adapter; Square Bore; spread bore; carburetor adapter; carb; carburetor adapter plate; intake manifold; universal; Thermo-Quad adapter; Thermo-Quad carburetor; Thermo-Quad; carter; fuel filter; hard line adapters;...

2732; Edelbrock; Carburetor; adapter; square-bore; carburetor adapter; carb; intake manifold; carburetor adapter plate; Edelbrock manifold

The Edelbrock 1407 Performer Series 750 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several...

Carburetor Choke Cable Bracket #1494 for Performer & Thunder Series AVS Carbs

These metering rods are designed for use with Edelbrock Performer Series and Thunder Series AVS carburetors only. Do not use with other brands. Sold in pairs.

The Spectre carburetor lift plate bolts onto 2 BBl or 4 BBl manifolds and allows the engine to be lifted with an engine hoist. This lift plate provides a stable and easy lifting point and creates a seal over the intake for safe storage. Made from heavy...

Spectre's universal Carburetor Adapter is designed to adapt 4 barrel carburetors to 4-bolt, 2 barrel manifolds or adapt 4-bolt 2 barrel carburetors to 4 barrel manifolds quickly and easily (will not fit Spreadbore manifolds). Manufactured using precision...

The Spectre Carburetor Adapter comes with a universal open spacer and a 4 hole insert spacer. This adapter is designed to allow you to adapt a Holley, Edelbrock or Carter/AFB 4 barrel carburetor to a Quadrajet intake manifold. The outer plate has been...